Pyle PT270AIU User Manual

REMOTE CONTROL
1. AUX/USB Selector
2. CD/DVD Selector
3. TUNER Selector
4. AUTO: Automatically search
the single source when power ON
5. IPOD/MP3 Selector
6. AUTOSCAN: AM/FM auto scan
selector scan and store stations
automatically. Can store 50 stations
7. MEMORY: After a station has been
found you can store the station by
pressing the MEMORY botton and
the screen will display SAVE.
8. ST/MONO: Stereo and mono selector.
9. SPEAKER A selector
Remote Controller 0peration
1. Remote controller should be operated within 6 meter and the scope of 30° in
front of receiver.
2. Make sure that there is no big obstacle between remote controller and
machine.
3. Remote sensor should be far away from the light, high amounts of light can
aect its performance.
www.PyleUSA.com
5
www.PyleUSA.com
6
10. SPEAKER B selector
11. FM/PAUSE selector
12. AM/PLAY selector
13/14. NEXT> PREV<
Next station & Previous selector
15/16. TUNING> TUNING<
Adjust the strong signal of
the stations
17. A+B SPEAKER selector
18/21. L/R
Left/Right balance control
19/20. VOL- VOL+
Master volume increase
and decrease
22. MUTE selector
www.PyleUSA.com

Pyle PT270AIU Specifications

General

Receiver type	stereo
Frequency range	40 - 15000 Hz
RMS rated power	300 W
Input sensitivity	400 mV
Audio output channels	2.1 channels
Signal-to-Noise Ratio (SNR)	76 dB
Total Harmonic Distortion (THD)	1 %
Power output per channel (1KHz@8 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	0
Line-in	Yes
Audio (L/R) in	1
Audio (L/R) out	5
Phono inputs (RCA)	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Ethernet LAN	No
Supported radio bands	AM, FM
Preset stations quantity	50
Compatible memory cards	SD
Display	-
Product color	Black
Volume control	Rotary
Apple docking compatibility	iPhone
AC input voltage	220 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	300 mm
Width	483 mm
Height	80 mm
Weight	7200 g