Pyle PT270AIU User Manual

SAFETY INSTRUCTIONS
1. Make sure that all connections are properly connected and the main volume is
set to minimum level before turning ON the unit.
2. When more than one pair of speakers are used, (specially the main speaker
output) make sure that the speakers used are of the same wattage and
impedance, otherwise the unit maybe damaged under high power or long
term operation.
3. To avoid humming sounds and unwanted noise, make sure that all the wires are
properly inserted.
4. For speaker cords, strip o the vinyl coating and twist the wire tip. Push down
the pink jack or loosen the screw terminal, before inserting the wire tip, then
fasten it and tighten the screw. Be careful not to let the wires stick out of the
terminal otherwise this may cause short circuit when wires of dierent terminal
contact each other.
5. After the unit is turned ON, adjust the main volume to the desired level same
with bass and treble volume, etc.
Features:
• Auto Station Seek
• A/B Speaker Output
• 110-220V Switchable
• USB/SD Card MP3 Player
• 50 Radio Station Memory
• Inputs: RCA (1 Audio Source)
• Total Power Output: 600 Watt
• AM/FM Quartz Synthesized Tuner
• Separate Subwoofer Gain Controls
• Digital Fluorescent Output Display Meter
• Microphone Volume, Tone & Echo Controls
• 2 Mono RCA Dedicated for Subwoofer Output
• Outputs: Banana Bbinding Post (to Speakers)
• iPod / MP3 Input with Included Connection Cable
• iPod Docking Station, Suitable for All iPod & iPhone Models
(USB, SD Memory & iPod Not Included)
• 150 Watt x 2 @ 8 Ohms
• 175 Watt x 2 @ 4 Ohms
www.PyleUSA.com
7
www.PyleUSA.com
8

Pyle PT270AIU Specifications

General

Receiver type	stereo
Frequency range	40 - 15000 Hz
RMS rated power	300 W
Input sensitivity	400 mV
Audio output channels	2.1 channels
Signal-to-Noise Ratio (SNR)	76 dB
Total Harmonic Distortion (THD)	1 %
Power output per channel (1KHz@8 Ohm)	150 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	0
Line-in	Yes
Audio (L/R) in	1
Audio (L/R) out	5
Phono inputs (RCA)	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Ethernet LAN	No
Supported radio bands	AM, FM
Preset stations quantity	50
Compatible memory cards	SD
Display	-
Product color	Black
Volume control	Rotary
Apple docking compatibility	iPhone
AC input voltage	220 V
AC input frequency	50 Hz

Weight and Dimensions

Depth	300 mm
Width	483 mm
Height	80 mm
Weight	7200 g