EasyManua.ls Logo

Pylontech Pelio-L-5.12

Pylontech Pelio-L-5.12
15 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13 / 15
Note
For battery information, please refer to the following table:
Basic
Information
Wi-Fi SN
SN (serial number) of Wi-Fi logger
Product SN
SN (serial number) of BMS
BMS version
Version of BMS software
Charge &
Discharge
Current(A)
Current of the battery during its working status
Voltage (V)
Voltage of the battery
Remain Capacity (Ah)
Remain capacity of the battery
Module Capacity (Ah)
Total capacity of the battery module
Cycle number
Cycle count of the battery that has used
Total Charge Capacity (Ah)
Total charge capacity of the battery
Total Discharge Capacity (Ah)
Total discharge capacity of the battery
Charge current recommend(A)
Recommended charge current for the battery
Discharge current recommend(A)
Recommended discharge current for the battery
Temperature of BMS(°C)
Temperature of the BMS module
Status
Total Pressure Overvoltage
It will display “Y” if the described status is triggered;
otherwise it will display -“.
Single Core Undervoltage
Total Voltage Under voltage
Charging Over Temperature
Discharge Over Temperature
Discharge Overcurrent
Charging Overcurrent
Cell Data
(Cell 1~n)
Voltage (V)
Voltage of the single cell
Temperature (°C)
Temperature of the single cell

Other manuals for Pylontech Pelio-L-5.12

Related product manuals