7
2.1 Features
1) NEW: Support 24h online monitor with WIFI connection.
2) NEW: Support service and upgrade via USB interface.
3) High power output.
4) Build-in soft-start function able to reduce current
strike when inverter need to start from battery.
5) Dual active protection on BMS level.
6) Support upgrade battery module from upper controller via
CAN or RS485 communication.
7) Enable 95% depth of discharge, available for the
inverter which completely follow Pylontech latest
protocol to operate.
8) The module is non-toxic, non-pollution and
environmentally friendly
9) Cathode material is made from LiFePO4 with safety
performance and long cycle life
10) Battery management system (BMS)has protection functions
including over-discharge, over-charge, over-current and
high/low temperature
11) The system can automatically manage charge and discharge
state and balance voltage of each cell
12) Flexible configuration, multiple battery modules can be
in parallel for expanding capacity and power
13) Adopted self-cooling mode rapidly reduced system entire
noise
14) The module has less self-discharge, up to 6 months
without charging it on shelf, no memory effect,
excellent performance of shallow charge and discharge
To Next Page
Loading...
Need help?
General
