Pylontech US2000 User Manual

28
Note:
1) During capacity expansion or replacement, when parallel different
SOC/voltage of module together, please maintain the system in idle for
≥15mins or till the SOC LEDs becomes similar (≤1dot difference) before
normal operation.
4.7 Power off
1) Turn external power source off.
2) Press red SW switch of master battery. Then all batteries will off.
3) Switch Power switch OFF.
4.8 Multi-group mode
By RS485: The interruption of each RS485 command shall at least≥1s

Pylontech US2000 Specifications

General

Brand	Pylontech
Model	US2000
Category	Camera Accessories
Language	English