Pylontech US2000B User Manual

1
Wattuneed Inverter Setup SOP - Pylon Battery
1.
Multisolar - On-grid Solution
(1) General Compatible Condition:
Battery Type US2000B/Phantom-S
Inverter Type
Multisolar 2kW
Multisolar
Plus 3kW
Multisolar Plus
5kW
Multisolar
3P 10kW
Recommend
battery Amount
According to load requirement and inverter rated power.
Battery Amount N = Load power/1200W
Communication Not required, but need finish the setting on Inverter software
DOD 80%
Working Temp. 0 - 50℃(Indoor operation)
Charge/Dischar
ge Current
N*25, N = Battery amount
Warranty 5yrs
(3) Inverter set up:
(a) Connect PV or Grid power to wake up inverter; Connect the communication cable from
Inverter to computer.
To take advantage of your Pylontech battery warranty please pay attention to
the settings below on WKS inverters for off-grid solutions (Off-Grid) or Multisolar
inverters for grid-based solutions (On-Grid).
Be sure to follow the safety precautions. You will find them at the end of the
document.

Pylontech US2000B Specifications

General

Battery Type	Lithium Iron Phosphate (LiFePO4)
Nominal Voltage	48V
Cycle Life DoD	80%
Communication	RS485, CAN
Discharge Voltage	40V
Protection Class	IP20
Cycle Life	6000 cycles
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Dimensions	442mm x 410mm x 132mm
Charge Voltage	53.5V

Summary

Multisolar - On-grid Solution

General Compatible Condition

Details compatible battery types and conditions for Multisolar on-grid systems.

Inverter Setup for On-Grid

Guides on initial inverter setup for on-grid Pylontech battery integration.

Software Configuration and Parameter Setting

Software Login and Interface Navigation

Instructions for launching, logging into, and navigating the SolarPower software interface.

Accessing Parameter Settings

Steps to access the parameter setting menu within the inverter software.

WKS - Off-grid Solution

General Compatible Condition for WKS

Lists compatible battery types and conditions for WKS off-grid systems.

On-Grid Parameter Configuration

Details recommended parameter settings for on-grid inverter operation.

WKS Inverter Setup and Configuration

WKS Inverter Wake-Up Procedure

Instructions on connecting the WKS inverter with the battery to wake it up.

Entering WKS Setting Mode

Steps to press 'Enter' for 5s to access the WKS inverter's setting menu.

WKS Specific Parameter Settings

Navigating WKS Setting Items

Procedure to choose setting item numbers and enter detailed parameters.

Recommended WKS Program Values

Specific program numbers and their recommended values for WKS inverter configuration.

Before Connecting

Pre-Connection Warnings and Checks

Essential safety warnings and checks before connecting the battery and inverter system.

In Using

Operational Safety Warnings

Safety guidelines and prohibited actions during the use of the battery system.

Safety Precautions

General Safety Reminders

Crucial reminders and advice for safe installation and usage of Pylontech batteries.