Pyramis 201075 - Troubleshooting Before Calling Service; Oven does not heat; Appliance does not work; Uneven Cooking

44
TRANSPORT INFORMATION
• During the transportation carry/place your product parallel to the oor with top-
side up position.
• Placed the cardbord aligned with the tray to inner side of oven door for prevent
from the wire grid and tray to oven door.Tape to the side walls of the oven door.
• Do not use the oven door handle to move the appliance, such as to remove it
from the packaging. (See Figure 16)
Figure 16
TROUBLESHOOTING BEFORE CALLING SERVICE
Do not attempt to repair the device yourself under no circumstances. Intervention to product
should be made only by authorized service.
Before calling for service should be done as follows.
Oven does not heat.
- Function knob and Thermostat knob are not set. Set the function knob and thermostat knob.
- If the appliance has a timer, the timer may not be set. Set the time.
- No power. Check mains supply and fuse box.
The appliance does not work.
- The main fuse is defective or has tripped. Check fuses in the fuse box.If necessary,
replace or reset them.
- Appliance’s plug can not be connected to the grounded socket. Check the plug connection.
- Function knob and Thermostat knob are not set. Set the function knob and thermostat knob.
- If the appliance has a timer, the timer may not be set. Set the time.
Cook (Lower / Upper section is not cooked evenly)
- According to the operation manual rack positions, re-review the cooking times and
temperatures.
Oven light does not work.