Pyronix MATRIX 816

Matrix 6/816 User Manual
RINS545-7 Page 5
2. YOUR PANEL DETAILS
The Matrix control panel is supplied with the factory default configuration. However, the panel configuration is
flexible and can be changed to meet your requirements.
Ask your engineer to fill in the following tables, noting any changes he might have made to the default
settings.
2.1 Zone Configuration
Programmed Zone Type
Zone
?
Guarded area
Arm Mode A
Arm Mode B
Arm Mode C
Arm Mode D
Default
Zone Type
1 Entry/Exit
2 Access
3 Immediate
4 Immediate
5 Immediate
6 Immediate
7 Immediate
8 Immediate
9 Immediate
10 Immediate
11 Immediate
12 Immediate
13 Immediate
14 Immediate
15 Immediate
16 Immediate
NOTE: Zones 7-16 are only available on the Matrix 816.