Need help?Do you have a question about the Pyronix MATRIX 6 and is the answer not in the manual?
General| Brand | Pyronix |
|---|---|
| Model | MATRIX 6 |
| Category | Control Panel |
| Language | English |
Details the function of each button on the keypad.
Explains the meaning of illuminated and blinking symbols on the keypad display.
Lists and explains various system fault codes and their meanings.
Provides a table to record programmed zone types and guarded areas.
Lists programmed and default values for entry, exit, and bell timers.
Lists programmed and default arm options for different modes.
Explains audible fault alerts and how to view open zones.
Explains the confidential mode feature that hides display when inactive.
Details latched alarms and system faults for specific regions.
Describes the four arm modes (A, B, C, D) and their purpose.
Provides step-by-step instructions for arming in different modes.
Instructions for disarming the system from inside and outside.
Details the procedure after an alarm event occurs.
Explains how to reset an alarm when the system is disarmed.
How to activate Personal Attack, Fire, and Medical alarms.
Explains the concept and function of a duress code.
Explains the meaning of different indicators in FTA mode.
Instructions on how to access and leave the user menu.
Lists user menu functions accessible by all users.
Lists user menu functions exclusively for the Master User.
Explains how to enable or disable the chime function.
Details how to arm the system with specific zones bypassed.
Instructions on how to view the system's event log.
How to adjust the volume of the keypad sounder.
How to adjust the brightness of the keypad backlight.
Instructions for changing the system's time.
Instructions for changing the system's date.
Explains how to change user codes and attributes.
How to activate programmable outputs from the keypad.
How to open a window for remote access.
Instructions for performing system tests.
Explains the Disarmed and Armed operational modes.
Lists and describes the four available arm modes (A, B, C, D).
Describes system actions during an alarm condition.
Explains how the panel enters FTA mode after an alarm.
Details the steps for arming and disarming the panel.
Explains Timed Exit, Final Door, Silent Arm, and Forced Arm options.
Guides users on how to view the event log.
Details event log fragments for various event types.
Details event log fragments for alarm types.
Details event log fragments for arming/disarming events.
Details event log fragments for system restorals.
Details event log fragments for system faults.
Details event log fragments for general system events.
Details event log fragments for upload/download events.
Explains the different types of zones supported by the panel.
Provides a summary of common arm/disarm and user menu operations.
To Next Page
