Need help?Do you have a question about the Pyronix Matrix 6/816 and is the answer not in the manual?
General| Brand | Pyronix |
|---|---|
| Model | Matrix 6/816 |
| Category | Control Panel |
| Language | English |
Details the function of each button on the keypad, including numerical, directional, and function keys.
Explains the meaning of illuminated, blinking, and extinguished states for various keypad icons.
Illustrates and describes common keypad display modes like Disarmed, Armed, and Alarm states.
Details system fault codes displayed on the keypad and their corresponding meanings.
Table to record programmed zone types for each zone and its default settings.
Details programmed and default values for entry, exit, and bell timers, plus arming options.
Describes fault tone alerts and how to view open zones on the keypad.
Explains hidden display mode, latched alarms (region-specific), and latched system faults.
Describes the four arm modes (A, B, C, D) and how they affect zone behavior.
Step-by-step instructions for arming the panel in different modes.
Covers quick arming methods and procedures for disarming the panel from inside or outside.
Details disarming after an alarm, viewing events in FTA mode, and handling latched alarms.
Instructions for activating PA, Fire, Medical alarms, and understanding duress codes.
Explains how to access and leave the user menu on the keypad.
Details functions available to all users: chime, bypass, event log, volume, and brightness.
Details functions exclusive to the Master User: time, date, user codes, and PGM activation.
Instructions for managing chime settings, bypassing zones, and viewing the event log.
Guides on adjusting keypad volume, brightness, and setting the system time.
Procedure for setting and adjusting the system date on the alarm panel.
How to change user codes, attributes, and activate PGM outputs from the keypad.
Procedures for opening a download window and performing system tests.
Explanation of the two main operation modes: DISARMED and ARMED.
Details the four available arm modes: A, B, C, and D.
Describes panel activations during an alarm state, including sounders and reporting.
Explains First to Alarm (FTA) mode and the procedures for entering and exiting premises.
Describes Timed Exit, Final Door, Silent Arm, and Forced Arm options.
Instructions on how to enter the user menu and navigate the event log.
Details codes for intruder, panic, fire, medical alarms, and arm/disarm events in the log.
Information on event log codes for restorals and system faults.
Details on system events and up/downloading events recorded in the log.
Explains the meaning and function of different zone types like Entry/Exit, Access, Fire, etc.
To Next Page
