5.1.4 Technical preparation
Electrical interface settings:
If the battery is connected to the user device directly, please check:
Whether the DC charging interface of the energy storage inverter
meets the charging voltage and current requirements in Table 1-1
Battery Pack Specifications.
Whether the power of the electrical equipment matches the
parameters listed in “Table 1-1 Battery Pack Specifications”;
Security check:
Fire-fighting equipment such as portable dry powder fire
extinguishers should be available near the equipment. Do not place
dangerous materials such as any flammable or explosive ones near the
battery.
5.2 Unpacking
When the battery arrives at the installation site, it must be unloaded
To Next Page
Loading...
