Pytes E-BOX SERIES LFP Battery User Manual
11
3 Operating Environment
Battery operating environment requirements:
Operating Temperature: -10℃~50℃
Relative Humidity: 20%-80%, no condensation
Altitude: ＜4000m
Site environment requirements: Keep away from heat source, avoid
direct sunlight, no corrosive gas, no explosive gas, no insulating gas,
no insulating conductive dust.
Installed in cabinet which shall not be opened without a tool or
install in a restricted access area.
4 Packaging, transportation, storage requirements
4.1 Transportation
Always check all applicable local, national, and international
regulations before transporting an LFP battery.
During the transportation, protect the battery from severe vibration,
shock or squeeze, and from exposure to the sunlight and rain.
During the loading and unloading process, the battery should be
handled lightly and should be protected against falling, rolling and from
being pressed with heavy pressure.
4.2 Storage
Follow the storage instructions in this manual to optimize the
lifespan of the LFP battery during storage. If these instructions are not
followed and the LFP battery has no charge remaining when it is checked,
consider it to be damaged. Do not attempt to recharge or use it. Replace
it with a new LFP battery.
See previous storage temperature conditions.
To Next Page
Loading...