20
REMOTE CONTROL BATTERY INSTALLATION AND WARNINGS
• Open the battery compartment cover on the back of the remote control
• Insert 2 x 1.5V type AAA batteries placing them according to the correct polarity.
• Open the battery compartment cover on the back of the remote control
• Insert the batteries (check the number of batteries and the type in the remote control
compartment) with the correct polarity
• Close the battery compartment cover.
• Batteries once installed should not be exposed to excessive heat such as sunshine, fire
or the like.
• Do not use old and new batteries in the remote control.
• Do not use dierent types of battery.
• If it is not used for a long time, it is recommended to remove the batteries from the
remote control.
• Keep batteries away from children and pets.
• Never throw batteries into fire.
• Accidental dropping of the remote control, resulting in breakage, will immediately in-
validate the warranty.
• The remote control works eectively when used up to about 5m away from the TV.
• Do not expose the remote controller sensor to strong light
REMOTE CONTROL (CONT.)
To Next Page
Loading...
Need help?
General
