50 51
APPENDIX
16. Remote control does not work. Possible Causes:
a. Need to enter the correct Device ID on the remote control.
b. Distance is too far or control angle is too small.
c. Remote control battery power is low.
d. Remote control is damaged or combo DVR front panel is damaged.
17. Can not playback the downloaded file. Possible Causes:
a. There is no media player.
b. Need Divx Codec in file player
18. Forgot local menu operation password or network password
a. Contact Q-See tech support and we can generate a new password for the unit.
PC MODULE PARAMETERS
CPU Intel Core™2 Duo CPU E4600
MOTHERBOARD G41/P41 chip
HDD 8200G
RAM 1GB
VGA GMA3100/NVIDIA GeForce 8400/
ATI RADEON HD3450
Full Direct Draw Support with 512MB Video
RAM
OS Windows 2000(SP4 above) /Windows
XP(SP2 above)/ VISTA/Win7
DIRECTX 9.0
COMPONENT MINIMUM REQUIRED
CPU Intel P4 2.8G minimum or later Intel processor
MOTHERBOARD Intel with Intel system chipset
HDD 250GB minimum
RAM 1GB minimum
VGA Supports MOST* AGP and PCI-E Video Cards
with 128MB of RAM or more with full Direct Draw
support.
*Some newer PCI-E cards are not yet supported
OS Win 2000(SP4 above) /Win XP(SP2 above) /VISTA/
Win7
DIRECTX 9.0
WARNING! Do not turn the system power off during the upgrade process!
Doing so may damage the chipset and prevent the DVR from starting.
A.2 MINIMUM COMPUTER CONFIGURATION
Minimum required configuration of a PC for remote connection:
Minimum PC configuration for 4-channel real time access with fully open
mainstream channel
To Next Page
Loading...
