Need help?Do you have a question about the Q-See QT428 and is the answer not in the manual?
General| Model | QT428 |
|---|---|
| Channels | 8 |
| Video Compression | H.264 |
| Video Output | HDMI, VGA |
| Remote Access | Yes |
| Audio Output | 1 Channel |
| Motion Detection | Yes |
| Recording Mode | Continuous, Scheduled, Motion Detection |
| Operating System Compatibility | Windows, Mac |
| Recording Resolution | D1 |
| Network Interface | RJ45 |
| Mobile App Support | Yes (Q-See View) |
Contact information for Q-See customer support and technical assistance.
Guidelines for safe electrical installation and operation of the DVR.
Precautions to avoid damage during transport, storage, and installation.
Instructions for proper handling and installation of the DVR.
Requirement for authorized personnel for examination and repair work.
Recommended operating temperature and environmental conditions for the DVR.
Information regarding the use of Q-See recommended accessories for the DVR.
Conditions and damages not covered under the free service scope of the company.
Form for registering the product to fulfill warranty terms.
Overview of the DVR system's technology and applications.
Highlights of the DVR's key features and capabilities.
Step-by-step guide for installing a SATA hard drive into the DVR.
Explanation of the buttons, indicators, and ports on the DVR's front panel.
Description of the connections and ports available on the DVR's rear panel.
Instructions for operating the DVR using the remote control device.
Guide on how to use a USB mouse for navigating the DVR interface.
Procedures for powering the DVR on and off using different methods.
Process for logging into and out of the DVR system.
How to view live video feeds from connected cameras.
Configuration of fundamental system settings like time, date, and language.
Settings related to live camera display, monitor output, and masking.
Settings for enabling, configuring, and managing video recording parameters.
Setting up recording schedules based on time and events.
Configuration for external alarm sensors and their trigger actions.
Settings for motion detection sensitivity, area, and scheduling.
Configuration for handling and triggering alarms when video signal is lost.
Settings for other alarm types like disk full or IP conflict.
Configuration of alarm output triggers and relay actions.
Setup of IP address, ports, gateway, DNS, and PPPoE for network connection.
Configuration of secondary video stream parameters for network efficiency.
Setting up email server and recipient addresses for alerts.
Configuration for DDNS server and other network-related options.
Managing user accounts, types, and access permissions on the DVR.
Configuration of serial port settings for PTZ camera control.
Procedure to reset all DVR settings to their default values.
Functionality to export configuration for backup or import settings.
Searching for recorded video files based on specific date and time.
Searching for recorded video files based on event types like motion or sensor triggers.
Managing, locking, unlocking, and deleting recorded video files.
Process for backing up recorded video data to external storage devices.
Viewing hardware, firmware, and system details of the DVR.
Accessing the DVR over a network connection from a computer.
Methods for configuring remote access via DHCP, Static IP, PPPOE, and DDNS.
Instructions for setting up mobile surveillance on Windows Mobile Pro devices.
Instructions for setting up mobile surveillance on Symbian devices.
Setup guide for accessing the DVR using an iPhone client.
Setup guide for accessing the DVR using an Android client.
Detailed technical specifications of the DVR, including video, audio, and interface details.
To Next Page
