Q-See QT428 User Manual

MAIN MENU SETUP GUIDE QT428 User Manual
36 | Page
Definitions and descriptions of network configuration:
Parameter
Meaning
HTTP port
The port number of accessing IE browser. The default
port is 80
Server
port
The port number for data. The default port is 6036
Static IP
IP address
The IP address of the DVR
Subnet
mask
The subnet mask of the server
Gateway
The gateway of the router
DNS
server
The address of DNS server
PPPoE
User name
User name of broad band account
Password
Password of broad band account
DDNS server
DDNS
server
Website provided by dynamic domain name supplier.
The optional: myq-see.com, www.dyndns.com
User name
User name to log in to the website of domain name
supplier
Password
Password to log in to the website of domain name
supplier
4.6.2 Sub Stream
Step 1: Enter into system configurationnetwork configurationsub stream; refer to Fig 4-33:
Fig 4-33 Network Configuration-Sub Stream
Step 2: Select fps, resolution, quality, encode and max bit rate
Step 3: User can setup all channels with same parameters, checkmark “all”, then to do relevant setup.
Step 4: Click “default” button to restore default setting; click “apply” button to save the setting; click “exit” button to
exit current interface.

Q-See QT428 Specifications

General

Brand	Q-See
Model	QT428
Category	DVR
Language	English