Q-See QT428 - Email; 4 Other Settings

MAIN MENU SETUP GUIDE QT428 User Manual
37 | Page
Definitions and descriptions of network stream:
Parameter
Meaning
FPS
Range from: 1-30
Resolution
Supports CIF and D1
Quality
The quality of the video image. The higher the value is, the clearer
the recorded image, and the more hard drive space the recordings
take up
. Six options: lowest, lower, low, medium, higher and highest.
Encode
VBR and CBR
Max bit rate
Range from: 64 Kbps, 128 Kbps, 256 Kbps, 512 Kbps, 768 Kbps,
1Mbps, 2 Mbps
4.6.3 Email
Step1: enter into system configurationnetwork configurationemail; refer to Fig 4-30:
Fig 4-30 network configuration-email
SMTP Server/Port: the name and port number of SMTP server.
Tick off “This server requires a secure connection (SSL)”; user can setup mail servers (such as Gmail) according to
actual needs,
Send address/password: sender’s email address/password
Receive address: receiver’s email address. Here user can add at least three mail addresses.
Click TEST button to test the valid of the mailbox.
Attaching image amount: user can attach at least three images by one time.
4.6.4Other settings
Step1: enable DDNS server: user needs to input user name， password and host domain name of the registered
website, click TEST to test the effectively of relevant information.