Need help?Do you have a question about the Q-See QR-SERIES and is the answer not in the manual?
General| Series | QR-Series |
|---|---|
| Video Input | BNC |
| Audio Input | RCA |
| Audio Output | RCA |
| Remote Access | Yes |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Compression | H.264 |
| Network Connectivity | Ethernet |
| HDMI Output | Yes |
| VGA Output | Yes |
| USB Ports | 2 |
| Power Supply | 12V DC |
| Channels | 4, 8, 16 |
| Video Output | BNC, HDMI, VGA |
| Operating System Compatibility | Windows, Mac |
| Mobile App Support | Yes |
Steps for physically installing the hard disk drive.
Solutions for when the system detects no video input.
Configuring display names and screen positions for each camera.
Configuring the system's date, time, and time zone.
Enabling and setting user and administrator passwords.
Checking HDD status, space, and configuring overwrite settings.
Steps to format the hard disk drive for use.
Configuring alarm notifications for various events.
Setting up motion detection sensitivity and detection areas.
Setting protocol, baud rate, and address for PTZ cameras.
Manually starting and stopping video recording.
Controlling PTZ camera functions like zoom, focus, and iris.
Navigating the video search menu and file list.
Steps for manually backing up recorded video files.
Instructions to install and use the playback software.
Configuring recording modes based on alarm triggers.
To Next Page
