What to do if mouse doesn't work on Q-See QT DVR?
If you cannot use the mouse with your Q-See DVR, wait 5 minutes after connecting the mouse and then try again. The mouse may not be securely connected, so plug/unplug it several times. The mouse might also be incompatible with the system, so please try another mouse.
What to do if Q-See QT DVR does not start after connecting the power?
If your Q-See DVR does not start after connecting the power, try changing the adapter. Also, check the cable and the ports of both the monitor and the DVR.
What to do if the Q-See DVR does not start after connecting the power?
If your Q-See DVR doesn't start after connecting the power, the power adapter may be damaged or not providing enough power. Try changing the adapter. The DVR may also not be getting enough power from the outlet or surge protector. There could also be a problem with the system board on the DVR.
Why I cannot record with my Q-See QT DVR?
If you cannot record with your Q-See DVR, the HDD might not be formatted. Please format it manually. The record function may not be enabled or set up correctly, please refer to Section 4.3 Record Configuration. The HDD might be full, and the recycle function is not enabled; refer to Section 4.3 Record Configuration and the Recycle Record Tab in the Record Menu. Finally, the HDD could be damaged and need replacement.
How to fix Q-See QT DVR that does not start?
If your Q-See DVR does not start after connecting the power, the power adapter may be damaged or not providing enough power, so please change the adapter. Also, the DVR may not be getting enough power from the outlet or surge protector. Finally, there could be a problem with the system board on the DVR.
What to do if Q-See DVR cannot find hard drive?
If your Q-See DVR cannot find the hard disk drive, the power adapter might not be providing enough power, or the adapter isn't getting enough power from the outlet. Also, check the power and data cables on the HDD to ensure they are properly connected. Finally, the HDD might be damaged and need replacement.
What to do if I cannot use the mouse with my Q-See QT?
If you cannot use the mouse with your Q-See DVR, wait 5 minutes after connecting the mouse and then try again. Also, the mouse may not be securely connected, so try unplugging and plugging it in several times. If that doesn't work, the mouse might be incompatible with the system; try another mouse.
Why are no images displayed on some channels of my Q-See QT DVR?
If your Q-See DVR is not displaying images on some or all channels, it could be due to connection problems. Ensure that the cables and ports of the camera and DVR are properly connected. Another reason could be a camera problem. Check the cameras by attaching them directly to a TV or a working port on the DVR. Finally, the video format (NTSC/PAL) of the DVR might be different from that of the cameras; if so, change the DVR video format.
Why Q-See QT DVR indicator lights are on, but no output?
If the indicator lights of your Q-See DVR are on but there is no output, try changing the adapter. Also, check the cable and the ports of the monitor and DVR.
Why are no images displayed on my Q-See QT DVR channels?
If no images are displayed on some or all channels of your Q-See DVR, check the cables and ports of the camera and DVR. You might also need to change the DVR video format.
Essential safety precautions for preventing damage and injury before installing or using the equipment.
Configuration options for network connectivity, remote viewing, and internet access.
Detailed instructions on using the USB mouse for navigating menus and controlling DVR functions.
Overview of the remote control functions for operating the DVR from a distance.
Instructions for connecting monitors and televisions to the DVR for video output.
Guidance on connecting analog and SDI cameras to the DVR, including BNC and power connections.
Step-by-step guide for powering the DVR on, logging in, and safely shutting it down.
Overview of the control bar functions for live viewing and playback, including menu access and display modes.
Details on switching video output, viewing live camera feeds, and understanding status symbols.
How to use the Quick Playback feature to review recent recordings and set playback time periods.
Explanation of playback controls, including fast forward/rewind, zoom, and color adjustment.
Guide to initial setup, including menu navigation, system settings, and basic configuration.
Configuring device name, video format, language, and other system-wide settings.
Setting the correct date, time, and time format, including Daylight Savings Time adjustments.
Configuring resolution, frame rate, encoding, quality, and maximum bitrate for video streams.
Setting up IP addresses, ports, and network protocols for remote access and monitoring.
Creating and managing user accounts with specific permissions for system access.
Searching for recorded events within a specified range of dates and times.
Listing and playing back recorded events, filterable by date, time, type, and channel.
Locking, unlocking, or deleting recorded events from the DVR's storage.
Steps to select files, set times, and perform the backup process to external storage.
Monitoring system status, network connection, online users, history, and events.
Steps for connecting PTZ cameras, including RS485 block connections and protocol considerations.
Configuring PTZ camera settings, including serial port, advanced tabs, presets, and cruise.
Setting up and saving specific camera positions and movements as presets.
Configuring automated camera movement patterns between preset points.
Criteria for attaching external alarms, including grounding and connection types.
Information on alarm output ports, relay specifications, and connection precautions.
Setting up external sensors, defining alarm types, and handling actions upon activation.
Step-by-step instructions for installing or removing the DVR's hard disk drive, including safety precautions.
Addresses common problems like no power, no output, no images, HDD detection, recording failures, and mouse issues.
Instructions for downloading and installing new firmware onto the DVR.
General| Series | QT Series |
|---|---|
| Video Compression | H.264 |
| Remote Viewing | Yes |
| HDMI Output | Yes |
| VGA Output | Yes |
| Motion Detection | Yes |
| Channels | 4, 8, 16 |
| Recording Resolution | 1080p, 720p |
| Hard Drive Capacity | Up to 6TB |
| Mobile App Support | Yes |
| Network Connectivity | Ethernet |
To Next Page
