What to do if the Q-See DVR does not start after connecting the power?
If your Q-See DVR doesn't start after connecting the power, the power adapter may be damaged or not providing enough power. Try changing the adapter. The DVR may also not be getting enough power from the outlet or surge protector. There could also be a problem with the system board on the DVR.
What to do if Q-See QT DVR does not start after connecting the power?
If your Q-See DVR does not start after connecting the power, try changing the adapter. Also, check the cable and the ports of both the monitor and the DVR.
General| Series | QT Series |
|---|---|
| Video Compression | H.264 |
| Remote Viewing | Yes |
| HDMI Output | Yes |
| VGA Output | Yes |
| Motion Detection | Yes |
| Channels | 4, 8, 16 |
| Recording Resolution | 1080p, 720p |
| Hard Drive Capacity | Up to 6TB |
| Mobile App Support | Yes |
| Network Connectivity | Ethernet |
Essential safety precautions for preventing damage and injury before installing or using the equipment.
Configuration options for network connectivity, remote viewing, and internet access.
Detailed instructions on using the USB mouse for navigating menus and controlling DVR functions.
Overview of the remote control functions for operating the DVR from a distance.
Instructions for connecting monitors and televisions to the DVR for video output.
Guidance on connecting analog and SDI cameras to the DVR, including BNC and power connections.
Step-by-step guide for powering the DVR on, logging in, and safely shutting it down.
Overview of the control bar functions for live viewing and playback, including menu access and display modes.
Details on switching video output, viewing live camera feeds, and understanding status symbols.
How to use the Quick Playback feature to review recent recordings and set playback time periods.
Explanation of playback controls, including fast forward/rewind, zoom, and color adjustment.
Guide to initial setup, including menu navigation, system settings, and basic configuration.
Configuring device name, video format, language, and other system-wide settings.
Setting the correct date, time, and time format, including Daylight Savings Time adjustments.
Configuring resolution, frame rate, encoding, quality, and maximum bitrate for video streams.
Setting up IP addresses, ports, and network protocols for remote access and monitoring.
Creating and managing user accounts with specific permissions for system access.
Searching for recorded events within a specified range of dates and times.
Listing and playing back recorded events, filterable by date, time, type, and channel.
Locking, unlocking, or deleting recorded events from the DVR's storage.
Steps to select files, set times, and perform the backup process to external storage.
Monitoring system status, network connection, online users, history, and events.
Steps for connecting PTZ cameras, including RS485 block connections and protocol considerations.
Configuring PTZ camera settings, including serial port, advanced tabs, presets, and cruise.
Setting up and saving specific camera positions and movements as presets.
Configuring automated camera movement patterns between preset points.
Criteria for attaching external alarms, including grounding and connection types.
Information on alarm output ports, relay specifications, and connection precautions.
Setting up external sensors, defining alarm types, and handling actions upon activation.
Step-by-step instructions for installing or removing the DVR's hard disk drive, including safety precautions.
Addresses common problems like no power, no output, no images, HDD detection, recording failures, and mouse issues.
Instructions for downloading and installing new firmware onto the DVR.
To Next Page
