Need help?Do you have a question about the Q-See QS408 and is the answer not in the manual?
General| Model | QS408 |
|---|---|
| Channels | 8 |
| Video Compression | H.264 |
| Video Output | HDMI, VGA |
| Remote Access | Yes |
| Hard Drive Support | 1 SATA HDD |
| Maximum HDD Capacity | 4TB |
| Remote Viewing | Yes |
| Motion Detection | Yes |
| Operating System | Embedded Linux |
| Network Interface | RJ45 |
| Type | Digital Video Recorder |
| Storage Capacity | Up to 4TB |
| Mobile App | Yes |
| Power Supply | DC 12V |
| Audio Output | 1 RCA |
| Remote Access Via | Mobile App |
| Hard Drive Capacity | Up to 4TB |
Details critical warnings and safety measures to prevent electric shock hazards.
Details proper power connection, UPS, surge protection, and safety precautions.
Explains how to use a mouse for navigation, selection, and interaction with the DVR.
Explains user authority levels and how to set admin and user passwords for security.
Covers HDD status, formatting, and management of internal and external drives.
Guides users on searching and playing back recorded video footage.
Provides step-by-step instructions for backing up recorded video data to a USB drive.
Details settings for resolution, bitrate, audio, recording mode, and file size.
Allows users to program customized recording schedules based on time and event type.
Resets all system settings to their original factory defaults.
Provides steps to update the DVR system firmware using a USB drive.
Provides detailed instructions and safety precautions for installing a hard drive.
To Next Page
