Need help?Do you have a question about the Q-See QS SERIES and is the answer not in the manual?
Physically connect your DVR to a router or modem using an Ethernet cable for network access.
Instructions to find the DVR's LAN and WAN IP addresses via the Network Information window.
Steps to configure router ports for remote DVR access using UPnP, DMZ, or specific router settings.
Verifies if network ports are open and accessible using an online tool like canyouseeme.org.
Covers static IP setup and PPPoE connection via modem for network access.
Configures DDNS service for a custom web address to access the DVR remotely.
Troubleshooting common network connectivity problems and multi-router scenarios.
Configures the DVR to send email notifications with JPEG snapshots upon alarm events.
Guide for remotely viewing cameras using a computer or mobile device after network setup.
Instructions on how to log into the DVR using a web browser or the helper application.
Resolves browser compatibility issues, such as User Account Control and ActiveX settings.
Describes the Live View window, displaying live camera feeds and basic controls.
Accesses recorded video from the DVR and covers display and file backup operations.
Guide for installing and using MiniPlayer software to play back recorded video files.
Guide to using the QS View mobile app for live viewing, playback, and DVR management.
Guides on adding, editing, and switching between DVRs in the QS View mobile application.
Covers remote and local video playback, and image playback on mobile devices.
Details the product warranty terms, coverage, and liability exclusions for Q-See products.
To Next Page
General
