43
4.6 USER MANAGEMENT
USER ACCOUNTS AND PASSWORDS
You can set up accounts for each individual user and grant them control of select parts of
the surveillance system. An administrator account is already created on the DVR. Additional
accounts can be created for users but only one administrator account is allowed.
To add a user select the Add button and the ADD USER window will open. It will have two
tabs; General and Authority
PICTURE 4-27
PICTURE 4-28
PICTURE 4-29
General Tab
Input the name, password and select the
type of user – normal or advance.
If you only want this user to be able to access
the DVR from a specific computer on the
network then select the Binding PC MAC
Address option and then enter the MAC
address of that computer.
Authority Tab
In this tab you can give this user access to all
or part of the system and its functions.
Setup button – Modify user’s name, type, binding PC Mac address (optional) and etc. With
the exception of changing the password, the Admin account may not be modified.
Delete button –Remove a user from the system
Change Password button – Modify a user’s password. The admin password should be
changed. The default is 123456.
To change a password, simply click on the button and enter the current password in the
pop-up window, along with the desired new password in the New Password and Confirm
Password fields before clicking OK to save and Exit to close the window.
To Next Page
Loading...
Need help?
General
