REMOTE SURVEILLANCE QT428 User Manual
62 | Page
7.3 Port Forwarding
To access the DVR from a remote computer you need to forward ports 80 and 6036 from the
router the DVR is attached to, to the IP address of the DVR.
1. Connect your DVR to the Router and power on DVR
2. Configure your DVR and Set up port forwarding on your router
a. Go to www.portforward.com/qsee
b. Choose your DVR or Series (QT, QSDT, QR, QS etc) from the list provided
c. Select the make and model of your router from the list
To Next Page
Loading...
