4
IMPORTANT SAFEGUARDS AND WARNINGS
• MUST
•
•
•
•
• MUST
•
•
The QLK-150 Wheelchair Docking System
plus the shoulder and lap belt (occupant restraint) make a complete
wheelchair securement system.
•
•
on, DO NOT use the QLK-150 Wheelchair Docking System.
• A Stabilizer MUST be installed with the QLK-150 Wheelchair Docking
•
• Do not operate the vehicle if the warning buzzer is beeping, or the red
light is lit up on the Dash Control.
•
•
• The QLK-150 Wheelchair Docking System and all system components
collision.
• MUST
• MUST
• Only use Q’Straint® components
•
• NOT
• Vehicle anchor points may require reinforcement.
MUST
• MUST
•
• The QLK-150 Wheelchair Docking System MUST be installed with a
compliant occupant restraint system (shoulder and lap belt).
• MUST
•
• MUST
•
inside the Docking System, the Green Light on the Dash Control is
illuminated and wheelchair occupant is properly secured by a Shoulder
and Lap belt (Occupant Restraint).
•
• Make sure Docking Bolt is secured inside Docking System—the Green
Light on Dash Control will be illuminated if the Locking Pawl is closed
without the Docking Bolt secured inside Docking System.
•
open on the Docking System so that all lights on the Dash Control
power.
• DO NOT accidentally push the Manual Release Lever on the
because it will open the Locking Pawl and release the wheelchair.
•
•
• MUST
To Next Page
Loading...
Need help?
General
