Qlima D720 Cube

32
NETWORK CONFIGURATION BY SELECT APPLIANCE TYPE :
1. If the bluetooth network configuration is failure, please select the appliance type.
2. Please follow the above steps to enter “AP” mode.
3. Choose the network configuration method.
4. Choose the “ Scan the QR code ” method. Scan the QR code on the unit.
5. When choose the “Manual Setup” method(Android). Connect to the wireless
network(iOS)
NOTE: Steps 3 and 4 are applicable to Android system only. iOS system does not need
these two steps.
4
32
man_wifi D720 Cube ('21) V3.indd 32man_wifi D720 Cube ('21) V3.indd 32 05-07-2021 14:1705-07-2021 14:17