133
4
When the cable is not fasten enough, use the buckle to prop it up , so it can be clamped tightly.
NOTE: After finishing connection, place the wire plug-in connectors at the proper position as shown
below, otherwise the electrical wiring cover would be lifted up.
For Multi-type models:
One-twin One-three
J
REFRIGERANT PIPING CONNECTION
Connecting the refrigerant pipe to outdoor unit
CAUTION: For your safety, always wear goggles and work gloves when connecting the pipes.
NOTE: All the pictures are for explanatory purposes only. The actual shape of the outdoor unit you
purchased may be slightly different.
1. First remove the water tray on the outdoor unit as shown in Fig.6.1.
To Next Page
Loading...
