EasyManuals Logo

Qlima SPHP 130 User Manual

Qlima SPHP 130
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
36
A
SAFETY INSTRUCTIONS
Install this device only when it complies with local/nation-
al legislation, ordinances and standards. This product is
intended to be used as a pool heat pump for residential
pools. Check the mains voltage and frequency. This unit is
only suitable for earthed sockets, connection voltage 220-
240 V~ / 50 Hz.
IMPORTANT
The device MUST always have an earthed
connection. If the power supply is not earthed, you
may not connect the unit. The plug must always
be easily accessible when the unit is connected.
Read these instructions carefully and follow the
instructions.
The pool heat pump contains a refrigerant and can
be classified as pressurized equipment. Therefore
always use an authorized air conditioning engineer
for maintenance of the pool heat pump.
Before connecting the unit, check the following:
The voltage supply must correspond with the mains volt-
age stated on the rating label.
The socket and power supply must be suitable for the cur-
rent stated on the rating label.
The plug on the cable of the device must fit into the wall
socket.
The device must be placed on a stable surface.
The electricity supply to the device must be checked by a
recognised professional if you have any doubts regarding
the compatibility.
This device is manufactured according to CE safety stand-
ards. Nevertheless, you must take care, as with any other
4
Q_man_SPHP 130 ('21) V6.indd 36Q_man_SPHP 130 ('21) V6.indd 36 21-12-20 14:1521-12-20 14:15

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Qlima SPHP 130 and is the answer not in the manual?

Qlima SPHP 130 Specifications

General IconGeneral
Best uses-
Control typeButtons
Product typeElectric pool heater
Product colorBlue
Easy to installYes
Buttons quantity4
Pool capacity (max)16000 L
Pool capacity (min)- L
Units of measurement°C
Maximum heating capacity2.8 °C/h
Minimum pumping capacity2 m³/h
Temperature measurement range15 - 40 °C
Coefficient of performance (COP)4.83
International Protection (IP) codeIPX4
Operating temperature (T-T)8 - 43 °C
Motor power580 W
Input voltage220 - 240 V
Input frequency50 Hz
Weight and Dimensions IconWeight and Dimensions
Depth400 mm
Width385 mm
Height280 mm
Weight18000 g

Related product manuals