3–Installing Drivers
Windows Driver Software
22 BC0154503-00 C
6. If you selected Custom in Step 5, complete the Custom Setup window
(Figure 3-5) as follows:
a. Select the features to install. By default, all features are selected. To
change a feature’s install setting, click the icon next to it, and then
select one of the following options:
This feature will be installed on the local hard drive—This
setting marks the feature for installation without affecting any of
its subfeatures.
This feature, and all subfeatures, will be installed on the
local hard drive—This setting marks the feature and all of its
subfeatures for installation.
This feature will not be available—This setting prevents the
feature from being installed.
b. Click Next to continue.
Figure 3-5. InstallShield Wizard: Custom Setup Window
To Next Page
Loading...
