4 – Managing Switches
Configuring SNMP
4-28 59264-02 A
S
Configuring SNMP
Configuring the Simple Network Management Protocol includes:
SNMP Properties Configuration
SNMP Trap Configuration
SNMP v3 Manager and User Configuration
SNMP Properties
Use the SNMP Properties dialog (Figure 4-11) to change SNMP configuration
parameters. To open the SNMP Properties dialog, select a switch in the topology
display or open the faceplate/backplate display, open the Switch menu, select
SNMP, and select SNMP Properties. After making changes, click the OK button
to put the new values into effect.
Search List Domain Names The suffix that is appended to the user-specified host-
name for the search.
NOTE:
Since Read Community, Trap Community, and Write Community settings are
like passwords and are write-only fields, the current settings are displayed as
asterisks.
Table 4-6. Network Properties — DNS Configuration
Parameter Description
To Next Page
Loading...
Need help?
General
