QNAP QMiro-201W User Manual

No. Component
2 Reset button
For details, see Reset Button.
3 WAN port
4 LAN port
5 USB 3.2 Gen 1 Type-A port
Reset Button
QNAP routers can be reset to factory defaults using the reset button located on the rear side of the device.
For details on the component placement, see the rear side of the device (see Rear Panel).
Operation User Action Result
Reset Press and hold the button for 3
seconds.
The router resets and all default settings are restored.
This will clear any statically assigned IP address
information, WAN and LAN configurations, and security
settings.
The router is unbound from the QNAP ID.
Top Panel
No. Component
1 WPS button
For details, see WPS Button.
WPS Button
Wi-Fi Protected Setup (WPS) is a protocol that enables a simple wireless network setup. It allows users to
set up a wireless network without the need to configure any network names, passwords, and other
cryptographic information.
QMiro-201W User Guide
Product Overview 10

QNAP QMiro-201W Specifications

General

Brand	QNAP
Model	QMiro-201W
Category	Wireless Router
Language	English