2. Product Overview
About the QMiro-201W
The QMiro-201W is QNAP's first tri-band wireless mesh network (WMN) router equipped with QuWAN to
support SD-WAN deployment. The router features four internal antennas and supports one 2.4 MHz and two
5 MHz network bands. You can configure and manage multiple QMiro-201W devices using the QuRouter
web interface or mobile app.
Hardware Specifications
Warning
If your QNAP product has hardware defects, return the product to QNAP or a QNAP-
authorized service center for maintenance or replacement. Any attempt to repair or
perform maintenance procedures on the product by you or an unauthorized third party
invalidates the warranty.
QNAP is not responsible for any damage or data loss caused by unauthorized
modifications and installation of unsupported third-party applications.
For details, see the QNAP Warranty Terms and Conditions.
Tip
Model specifications are subject to change without prior notice. To see the latest
specifications, go to https://www.qnap.com.
Component QMiro-201W
Processor
CPU Qualcomm® IPQ4019 SoC
Frequency 4-core 716.8 MHz
Architecture ARM Cortex-A7
Memory 512 MB DDR3L
Flash memory 4 GB eMMC
Network
Gigabit Ethernet ports 1 x 10 GbE RJ45
Antenna 4 internal antennas
Total power consumption 24W
External I/O Ports & Expansion Slots
USB ports 1 x USB 3.2 Gen 1 Type-A port
Interface
Buttons • Reset
• Wi-Fi Protected Setup (WPS)
Dimensions
Dimensions (H x W x D) 68 × 100 × 175.5 mm
(2.67 x 3.93 x 6.90 in)
Net weight 0.44 kg (0.97 lbs)
Other
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
Relative humidity Non-condensing relative humidity: 5% to 95%
QMiro-201W User Guide
Product Overview 5
To Next Page
Loading...
Need help?
General
