
Do you have a question about the QNAP QSW-1105-5T and is the answer not in the manual?
| Switch type | Unmanaged |
|---|---|
| Installed SFP modules quantity | 0 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Basic switching RJ-45 Ethernet ports quantity | 5 |
| 10G support | No |
| Networking standards | IEEE 802.3, IEEE 802.3ab, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x |
| Ethernet LAN data rates | 2500 Mbit/s |
| Throughput | 12.5 Gbit/s |
| Jumbo frames | 9000 |
| MAC address table | 16000 entries |
| Jumbo frames support | Yes |
| Stackable | - |
| Certification | FCC, CE, BSMI, VCCI, LVD, CCC, KCC, ASNZ |
| Product color | Black |
| LED indicators | Activity, Link, Power, Speed, Status |
| Number of fans | 0 fan(s) |
| Electromagnetic compatibility | Class B |
| Power source | DC |
| DC input voltage | 12 V |
| Power consumption (max) | 12 W |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85176990 |
| Depth | 145 mm |
|---|---|
| Width | 180 mm |
| Height | 34 mm |
| Weight | 577 g |
Identifies the status indicator for the device's power.
Identifies the indicator for detecting network loops.
Identifies the five high-speed Ethernet network ports.
Identifies the port for connecting the external power adapter.
Details the operational states and meanings of the Power LED.
Explains the different states of the Loop Indicator LED.
Describes the RJ45 port LEDs for link speed and loop detection.
Illustrates connecting the power supply to the device and outlet.
Shows how to connect the device to other network devices.
States compliance with FCC rules for digital devices.
Confirms compliance with CE standards.
Provides guidance on proper disposal of electronic waste.
Indicates compliance with Restriction of Hazardous Substances directive.
Warns about potential radio interference in certain environments.
Advises against using the included power cord with other devices.











