Need help?Do you have a question about the QNAP QSW-M408 Series and is the answer not in the manual?
General| 10GbE SFP+ Ports | 4 |
|---|---|
| 10GBase-T Ports | 4 |
| 2.5GbE Ports | 0 |
| Number of Ports | 8 |
| Operating Humidity | 5% to 95% Non-condensing |
| MAC Address Table | 16K |
| Type | Managed Switch |
| Operating Temperature | 0°C to 40°C |
| Power Supply | Adapter, 100-240VAC, 50/60 Hz |
| Jumbo Frame | 9K bytes |
| Power Consumption (Max) | 30 W |
Lists the QSW-M408-4C, QSW-M408-2C, and QSW-M408S switch models provided in the package.
Details and identifies the console port, RJ45 ports, and SFP+ ports on the switch's front panel.
Instructions for connecting the power cable to the device's top panel power input.
Visual guide showing the connection of the switch, NAS, and computer for initial setup.
Explains how to configure IP settings for accessing the switch's web user interface via DHCP or static IP.
Provides default username and password information for logging into the switch's web interface.
Describes the behavior and meaning of system status and network port LEDs on the switch.
Details physical dimensions, weight, voltage range, switching capacity, and port counts for each model.
Outlines FCC, CE, WEEE, and RoHS compliance information for the QNAP switch.
To Next Page