QNAP TS-1263U-RP User Manual

32
2. To remove installed memory modules, pull the retention clips on each side so that the
module tilts up for easy removal.
Note: Always ensure that a memory module is installed in the Primary (red) slot.
If not, then the system will fail to start. When installing two memory modules, please
ensure that they are the same size and ideally use the same type/model for both slots.
3. Slide the memory module to the slot at a 45-degree angle (approximately) and press

QNAP TS-1263U-RP Specifications

General

Brand	QNAP
Model	TS-1263U-RP
Category	Network Hardware
Language	English