Need help?Do you have a question about the QNAP TS-431P and is the answer not in the manual?
General| Processor cores | 2 |
|---|---|
| Processor model | AL212 |
| Processor family | Annapurna Labs |
| Processor frequency | 1.7 GHz |
| Flash memory | 512 MB |
| Internal memory | 1 GB |
| Internal memory type | DDR3 |
| RAID levels | 0, 1, 5, 6, 10, JBOD |
| RAID support | Yes |
| Storage drive size | - \ |
| Storage drive capacity | 0 GB |
| Supported file systems | FAT32, HFS+, NTFS, ext3, ext4 |
| Storage drive interface | - |
| Storage drives installed | No |
| Storage drive sizes supported | 2.5, 3.5 \ |
| Supported storage drive types | HDD & SSD |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 4 |
| Supported storage drive interfaces | Serial ATA, Serial ATA II, Serial ATA III |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Supported network protocols | IPv4, IPv6, CIFS/SMB, AFP (v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, SMSC |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity | 3 |
| Chassis type | Tower |
| Cooling type | Active |
| Fan diameter | 120 mm |
| Product color | White |
| LED indicators | HDD, LAN, Status, USB |
| Number of fans | 1 fan(s) |
| Cable lock slot type | Kensington |
| Type | NAS |
| Noise level | 19.5 dB |
| Device class | Home & Home Office |
| Share folder | CIFS/SMB |
| Backup features | Cloud, iSCSI LUN |
| Browser supported | Internet Explorer 10+, Firefox 8+, Safari 4+, Chrome |
| Security algorithms | 256-bit AES, HTTPS, SNMP, SSH, SSL/TLS |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Fan voltage | 12 V |
| AC input voltage | 100-240 V |
| Power supply location | External |
| Power consumption (typical) | 26.7 W |
| Number of power supply units | 1 |
| Power supply unit (PSU) capacity | 90 W |
| Cables included | AC, LAN (RJ-45) |
| Operating system version | 4.2 |
| Operating system installed | QNAP Turbo System |
| Server operating systems supported | Windows Server 2003, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2 |
| Windows operating systems supported | Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 8, Windows 8 Enterprise, Windows 8 Enterprise x64, Windows 8 Pro, Windows 8 Pro x64, Windows 8 x64 |
Weight and Dimensions| Depth | 169 mm |
|---|---|
| Width | 160 mm |
| Height | 219 mm |
| Weight | 3000 g |
| Package weight | 4300 g |
Crucial safety precautions for operating and handling the NAS device.
Step-by-step instructions for upgrading NAS memory modules across various models.
Guides for installing SATA hard drives into NAS bays for various models.
Procedures for safely replacing hard drives without system shutdown.
How to install heat sinks on M.2 SSD controllers for reliable operation.
Steps for recovering RAID configurations when drives are removed or fail.
To Next Page
