QNAP TS-251 User Manual

99
7.2 Hot-swap Hard Drives
QNAP NAS is compatible with 2.5-inch/3.5-inch SATA hard disk drives from major hard disk
brands. For the updated hard drive compatibility list, please visit
http://www.qnap.com.
Caution:
 QNAP disclaims any responsibility for product damage/malfunction or data
loss/recovery due to misuse or improper installation of hard disks in any occasions for
any reasons.
 Note that if a hard drive (new or used) which has never been installed on the NAS
before it is installed, the hard drive will be formatted and partitioned automatically and
all the disk data will be cleared.
System Support
s
3.5-inch
SATA
Hard
Drives
Support
s
2.5-inch
SATA
Hard
Drives
Suppor
ts 2.5”
SATA
SSD
Supports
M.2 SATA
SSD
Supports
Hot-swappa
ble Hard
Drives
(RAID 1 or
above only)
TS-112P, TS-212P,
TS-251C
✔
TAS-168, TAS-268,
TS-128, TS-228
✔
TS-131,TS-131P
✔ ✔ ✔
TVS-473, TVS-673,
TVS-873
✔ ✔ ✔
✔ (2280 &
2260)
✔
HS-210, HS-251,
HS-251+, TS-231,
TS-231+, TS-231P,
TS-251, TS-251+,
TS-251A, TS-431,
TS-431+,TS-431P,
TS-431U, TS-451,
TS-451+, TS-451A,
TS-651, TS-851,
TS-253 Pro, TS-453
Pro, TS-453S Pro,
✔ ✔ ✔ ✔

QNAP TS-251 Specifications

General

Flash Memory	512MB
Drive Bays	2
Hot Swappable Drive	Yes
Power Supply	65W adapter, 100-240V
Form Factor	Tower
Memory	1GB DDR3L RAM (expandable up to 8GB)
Network	2 x Gigabit RJ-45 Ethernet port
USB Ports	2 x USB 3.0, 2 x USB 2.0
HDMI Output	1
Weight	1.28 kg
Operating System	QTS
Dimensions	168 x 102 x 225 mm (6.61 x 4.02 x 8.86 inches)