Need help?Do you have a question about the QNAP TS-212P and is the answer not in the manual?
General| RAID levels | 0, 1, JBOD |
|---|---|
| RAID support | Yes |
| Storage drive capacity | 8 GB |
| Storage drive interface | Serial ATA II |
| Storage drives installed | No |
| Installed storage drive type | - |
| Supported storage drive types | HDD |
| Total installed storage capacity | 0 TB |
| Maximum supported storage capacity | 8 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 2 |
| Processor family | Marvell |
| Processor frequency | 1.66 GHz |
| Flash memory | 16 MB |
| Internal memory | 512 GB |
| Internal memory type | DDR3 |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Ethernet LAN (RJ-45) ports | 1 |
| Product color | White |
| Type | NAS |
| Power consumption (sleep) | 6 W |
| Power consumption (typical) | 13 W |
Weight and Dimensions| Depth | 218.4 mm |
|---|---|
| Width | 85 mm |
| Height | 165.5 mm |
| Weight | 910 g |
| Package weight | 2200 g |
Details FCC Class A and Class B compliance statements for QNAP NAS devices.
Refers to CE compliance standards for QNAP NAS products.
Explains how to turn the NAS on/off using the power button.
Details basic and advanced system reset operations via the reset button.
Describes LED indicators for system status, including power, initialization, and errors.
Explains LED status for LAN, 10GbE, HDD, USB, and eSATA interfaces.
Details system beep alarms for various events like fan failure, overheat, and disk status.
Provides steps to install RAM on specific 4-bay models.
Instructions for installing RAM on the TS-1635 NAS.
Details the process for installing RAM on the IS-453S model.
Covers installing network expansion cards for specific TVS and TS models.
Instructions for installing a network expansion card on the TS-1635.
Procedure for installing network cards in TVS-473, TVS-673, TVS-873.
Steps to install network expansion cards on TS-431XU and related series.
General procedures for installing hard drives across various NAS models.
Details on hot-swapping drives and model compatibility for this feature.
Details how to install heat sinks onto M.2 SSD controllers for reliable operation.
Covers the process of installing M.2 SSDs in various NAS models.
Guide to operating the LCD panel for system configuration and information viewing.
Instructions for installing a redundant PSU in 1U rackmount NAS models.
Steps for replacing a failed power supply unit in 2U/3U NAS models.
To Next Page
