EasyManua.ls Logo

QNAP TS-879 Pro - User Manual

QNAP TS-879 Pro
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
QNAP Turbo NAS
Hardware User Manual
© 2017. QNAP Systems, Inc. All Rights Reserved.

Table of Contents

Other manuals for QNAP TS-879 Pro

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-879 Pro and is the answer not in the manual?

QNAP TS-879 Pro Specifications

General IconGeneral
RAID levels0, 1, 5, 6, 10, JBOD
Storage drive size2.5/3.5 \
Hot-swap drive baysYes
Storage drive capacity0 GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA, Serial ATA II, Serial ATA III
Total installed storage capacity0 TB
Maximum supported storage capacity24 TB
Number of storage drives installed0
Number of storage drives supported8
Flash memory512 MB
Internal memory2 GB
Internal memory typeDDR3
Tcase69.1 °C
Bus typeDMI
L2 cache3 MB
Processor cores2
Processor modeli3-2120
System bus rate5 GT/s
Processor familyIntel® Core™ i3
Processor socketLGA 1155 (Socket H2)
Processor threads4
Processor codenameSandy Bridge
Processor frequency3.3 GHz
Processor cache typeSmart Cache
Processor lithography32 nm
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Conflict-Free processorNo
Processor front side bus- MHz
PCI Express slots version2.0
Processor operating modes64-bit
Thermal Design Power (TDP)65 W
On-board graphics card modelIntel® HD Graphics 2000
Number of processors installed1
CPU multiplier (bus/core ratio)33
Memory bandwidth supported by processor (max)21 GB/s
Maximum internal memory supported by processor32 GB
Cabling technology10/100/1000BASE-T(X)
Maximum data transfer rate1000 Mbit/s
Supported network protocolsTCP/IP (IPv4, IPv6), CIFS/SMB, AFP, NFS(v3), FTP, FTPES, TFTP, HTTP, HTTPS, Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Fan120mm
Processor ARK ID53426
Dimensions (WxDxH)327 x 321.2 x 217.5 mm
Power requirementsAC 100-240V@50/60Hz
Networking featuresGigabit Ethernet
Compatible operating systemsMicrosoft Windows XP, Vista (32/64-bit), Windows 7 (32/64-bit), Server 2003/2008 R2, Apple Mac OS X, Linux, UNIX
Noise level27.4 dB
Number of users4096 user(s)
Security algorithms256-bit AES, HTTPS, SSH, SSL/TLS
Cables includedLAN (RJ-45)
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Chassis typeTower
Display typeLCD
Product colorBlack
LED indicatorsHDD, LAN, Status, USB
Number of fans2 fan(s)
Cable lock slot typeKensington
Power consumption (sleep)39 W
Power consumption (typical)101 W
Power supply unit (PSU) capacity350 W
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)0 - 90 %
Operating system version3.5
Operating system installedQNAP Storage Manager
Maximum number of PCI Express lanes16
Memory channels supported by processorDual
Intel Identity Protection Technology version1.00
On-board graphics card ID0x102
On-board graphics card base frequency850 MHz
On-board graphics card dynamic frequency (max)1100 MHz
Weight and Dimensions IconWeight and Dimensions
Weight8390 g
Package weight13980 g

Summary

Regulatory Notices

FCC Compliance Notices

Information regarding FCC compliance for QNAP NAS devices.

FCC Class A Notice

Compliance statement for FCC Class A digital devices.

FCC Class B Notice

Document Symbols and Warnings

Warning Symbol Usage

Icon indicating strict adherence required, with severe consequences for failure.

Caution Symbol Usage

Icon indicating potential data or product damage from actions.

Safety Warnings

General Safety Precautions

Essential safety guidelines for operating and maintaining the NAS.

Chapter 1. CPU and Memory Specifications

TS-112 P, TS-212 P Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-128, TS-228 Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TAS-168, TAS-268 Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-131, TS-231 Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-431, TS-431 U Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-231+, TS-431+ Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-131 P, TS-231 P, TS-431 P Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-431 XU Series Specs

Details CPU, Memory, Flash, and expansion slots for specific NAS models.

TS-1231 XU Series Specs

Details CPU, Memory, Flash, and expansion slots for specific NAS models.

TS-531 P, TS-531 X, TS-831 X Specs

Details CPU, Memory, Flash, and expansion slots for specific NAS models.

TS-1635, HS-210 Specs

Details CPU, Memory, Flash, and expansion slots for specific NAS models.

TS-451 U Series Specs

Details CPU, Memory, Flash, and power supply for specific NAS models.

TS-853 U Series Specs

Details CPU, Memory, Flash, and power supply for specific NAS models.

TS-1253 U Series Specs

Details CPU, Memory, Flash, and power supply for specific NAS models.

IS-453 S Specs

Details CPU, Memory, Flash, and drive slots for a specific NAS model.

TS-251 C Series Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-451 Series Specs

Details CPU, Memory, Flash, and drive slots for specific NAS models.

TS-651, TS-851 Series Specs

Details CPU, Memory, Flash, and IR sensor for specific NAS models.

HS-251+ Series Specs

Details CPU, Memory, Flash, and IR sensor for specific NAS models.

TBS-453 A Series Specs

Details CPU, Memory, Flash, and IR sensor for specific NAS models.

TS-251+ Series Specs

Details CPU, Memory, Flash, and IR sensor for specific NAS models.

TS-453 Bmini Series Specs

Details CPU, Memory, Flash, and IR sensor for specific NAS models.

TS-451+ Series Specs

Details CPU, Memory, Flash, LCD panel and IR sensor for specific NAS models.

TS-853 Pro Series Specs

Details CPU, Memory, Flash, LCD panel and IR sensor for specific NAS models.

TS-563 Series Specs

Details CPU, Memory, Flash, expansion slots, HDMI, LCD and IR sensor.

TVS-863 Series Specs

Details CPU, Memory, Flash, expansion slots, HDMI, LCD and IR sensor.

TS-253 A Series Specs

Details CPU, Memory, Flash, expansion slots, HDMI, LCD and IR sensor.

TS-853 A Series Specs

Details CPU, Memory, Flash, expansion slots, HDMI, LCD and IR sensor.

TVS-882 Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion, HDMI, LCD, IR, Thunderbolt, 10GbE LAN.

TVS-882 ST2 Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion, HDMI, LCD, IR, Thunderbolt, 10GbE LAN.

TVS-882 ST3 Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion, HDMI, IR, Thunderbolt, 10GbE LAN.

TVS-882 S Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion, HDMI, LCD, IR.

TS-463 U Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion and HDMI.

TS-863 U Series Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion and HDMI.

TVS-473, TVS-673, TVS-873 Specs

Details CPU, Memory, Flash, RAM slots, drive slots, expansion, HDMI, LCD, IR, USB 3.1.

Chapter 2. Power Button and Reset Button Behavior

Power Button Operations

Instructions for turning the NAS on and off using the power button.

Reset Button Operations

Instructions for basic and advanced system reset using the reset button.

Chapter 3. USB One Touch Copy

Using the USB One Touch Copy Feature

Steps to perform data copy using the front USB port and one-touch button.

Chapter 4. LED and Alarm Buzzer Specifications

System Status LEDs

Explains LED color and flashing patterns for system status.

Interface LEDs

Explains LED status for network, storage, and USB/eSATA interfaces.

Beep Alarm Specifications

Beep Alarm Descriptions

Details different beep sounds, number of times, and their corresponding system events.

Chapter 5. RAM Module Installation

General RAM Installation Precautions

Warnings and precautions for authorized technicians performing RAM installation.

TS-453 Bmini, TS-453 mini RAM Installation

Step-by-step guide for installing RAM in TS-453Bmini and TS-453mini models.

TBS-453 A RAM Installation

Step-by-step guide for installing RAM in TBS-453A models.

TS-451 S Series RAM Installation

Guide for installing RAM in various QNAP NAS models.

TS-1635 RAM Installation

Step-by-step guide for installing RAM in TS-1635 models.

TVS-473, TVS-673, TVS-873 RAM Installation

Steps for installing RAM in TVS-473, TVS-673, TVS-873 models.

TS-431 U Series RAM Installation

Guide for installing RAM in various QNAP NAS models.

TS-251+ Series RAM Installation

Guide for installing RAM in specific QNAP NAS models.

IS-453 S RAM Installation

Steps for installing RAM in IS-453S models.

Chapter 6. Network Expansion Card Installation

Network Expansion Card Compatibility

Information on compatibility between NAS models, brackets, and network cards.

General Network Expansion Card Installation

General steps for installing a network expansion card.

TS-1635 Network Expansion Card Installation

Specific steps for installing a network expansion card in TS-1635 models.

TVS-473 Series Network Expansion Card Installation

Steps for installing network expansion cards in TVS-473, TVS-673, TVS-873 models.

TS-431 XU Series Network Expansion Card Installation

Steps for installing network expansion cards in specific NAS models.

TS-831 XU Series Network Expansion Card Installation

Steps for installing network expansion cards in specific NAS models.

Chapter 7. Install and Hot-swap Hard Drives

Install Hard Drives

General instructions for installing hard drives into the NAS.

TS-x51 Series Hard Drive Installation

Detailed steps for installing HDDs in various NAS models.

TS-1635 Hard Drive Installation

Step-by-step guide for installing hard drives in TS-1635 models.

TS-453 Bmini Series Hard Drive Installation

Steps for installing hard drives in TS-453Bmini and TS-453Mini models.

TVS-473 Series Hard Drive Installation

Steps for installing hard drives in TVS-473, TVS-673, TVS-873 models.

TS-112 P Series Hard Drive Installation

Steps for installing hard drives in TS-112P, TS-212P, TS-251C models.

TAS-168 Series Hard Drive Installation

Steps for installing hard drives in TAS-168, TAS-268, TS-128, TS-228 models.

IS-453 S Hard Drive Installation

Steps for installing hard drives in IS-453S models.

Hot-swap Hard Drives Compatibility

Information and compatibility for hot-swapping hard drives in QNAP NAS.

Performing Hot-Swap of Failed Hard Drives

Steps to replace a failed hard drive in a RAID configuration without downtime.

Chapter 8. Install M.2 SSDs

M.2 SSD Heat Sink Installation

Guide for installing heat sinks onto M.2 SSD controllers for reliable operation.

TBS-453 A M.2 SSD Installation

Steps to add or replace M.2 SSD modules in TBS-453A models.

TVS-473 Series M.2 SSD Installation

Steps for installing M.2 SSDs in TVS-473, TVS-673, TVS-873 models.

Chapter 9. RAID Recovery

RAID Recovery Process

Steps to recover RAID configurations after drive removal or failure.

RAID Status During Recovery

Chart detailing RAID status changes during the recovery process.

Chapter 10. LCD Panel Operations

LCD Panel - QTS 4.3.0 and above

How to navigate and use the LCD panel for system settings and information.

Viewing System IP Address via LCD

How to view NAS IP addresses using the LCD panel.

Configuring System Settings via LCD

How to navigate the Main Menu on the LCD panel to change settings.

Viewing Disk Information via LCD

How to view disk temperature and capacity on the LCD panel.

Viewing Volume Information via LCD

How to view volume and LUN capacities on the LCD panel.

Viewing System Information via LCD

How to view system temperature and fan speeds on the LCD panel.

Reboot via LCD Panel

How to restart the NAS using the LCD panel.

Changing LCD Panel Password

Steps to change the LCD panel password.

System Messages on LCD Panel

How to view system error messages on the LCD panel.

System Messages and Descriptions

Lists system messages and their corresponding descriptions.

System Startup Phases Display

Explains the boot-up information displayed on the LCD panel for TVS-x82 Series.

Chapter 11. Power Supply Unit Installation

1 U Turbo NAS PSU Installation

Instructions for installing a redundant PSU in 1U Turbo NAS models.

2 U;3 U Turbo NAS PSU Replacement

Steps for replacing a failed PSU in 2U/3U Turbo NAS models.

Enabling Redundant PSU Warning Alerts

How to configure web interface alerts for redundant power supply status.

Technical Support Information

Online Support and Forum

Provides links for online support and the QNAP forum.

USA and Canada Technical Support

Contact details for technical support in the USA and Canada.

GNU General Public License

GPL License Terms and Conditions

Overview of the terms for copying, distribution, and modification of GPL licensed software.

GPL License Definitions

Defines key terms used in the GNU GPL, such as Source Code and Standard Interface.

GPL Basic Permissions

Outlines the fundamental rights granted under the GPL.

GPL Conveying Non-Source Forms

Rules for conveying covered works in object code form.

GPL Additional Terms

Details supplementary terms that can be added to the GPL.

GPL Termination and Acceptance

Explains license termination conditions and acceptance requirements.

GPL Patents

Covers patent licenses granted under the GPL.

GPL License Versions and Use

Discusses using specific or later versions of the GPL.

GPL Disclaimer of Warranty and Liability

Outlines warranty disclaimers and liability limitations in the GPL.

Appendix A: Product Compliance Class

FCC and CE Compliance Classes

Lists NAS models categorized by FCC and CE compliance classes.

Related product manuals