Need help?Do you have a question about the QNAP TS-219P and is the answer not in the manual?
General| Processor family | Marvell |
|---|---|
| Processor frequency | 1.2 GHz |
| Number of processors installed | 1 |
| Storage drive size | 3.5 \ |
| Storage drive capacity | 0 GB |
| Storage drive interface | Serial ATA II |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 2 |
| Flash memory | 16 MB |
| Internal memory | 0.5 GB |
| eSATA | Yes |
| USB 2.0 ports quantity | 3 |
| Dimensions (WxDxH) | 102 x 216 x 150 mm |
| Power requirements | 100 - 240 V AC, 50 - 60 Hz |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| Chassis type | Tower |
| Power supply unit (PSU) capacity | 60 W |
Weight and Dimensions| Weight | 1740 g |
|---|
Explains power button functions for turning on/off and hardware reset.
Details basic and advanced system reset procedures using the reset button.
Describes backing up data using the front USB port one-touch button.
Step-by-step guide for installing RAM modules in specific TS-x59 Pro II models.
Instructions for upgrading memory on specific TS-879U, TS-1279U, TS-EC879U, TS-EC1279U models.
Details on installing network expansion cards for TS-879 Pro and TS-1079 Pro models.
Instructions for installing network expansion cards in TS-879U-RP and TS-1279U-RP models.
Instructions for installing or replacing a power supply unit in 1U rackmount NAS models.
Steps for replacing a power supply unit in specific 2U Turbo NAS models.
Procedure for replacing the power supply unit in other 2U Turbo NAS models.
To Next Page
