Need help?Do you have a question about the QNAP TS-231 and is the answer not in the manual?
General| Flash Memory | 512MB |
|---|---|
| Drive Bays | 2 |
| LED Indicators | Status, LAN, USB, HDD1, HDD2 |
| Form Factor | Tower |
| Power Supply | External Power Adapter, 60W, 100-240V |
| CPU | Annapurna Labs Alpine AL-212 1.7 GHz dual-core |
| RAM | 512MB DDR3 |
| Maximum Internal Raw Capacity | 16TB (2 x 8TB HDD) |
| Network Interface | 1 x Gigabit RJ45 Ethernet port |
| Buttons | Power, Reset |
| Weight | 1.28 kg |
| Fan | 1 x 70 mm, 12V DC |
| Operating System | QTS (Embedded Linux) |
| Power Consumption (In Operation) | 15.6W |
| USB Ports | 2 x USB 3.0 |
Essential safety guidelines for NAS operation to prevent injury or damage.
Details how to operate power and reset buttons and their system behaviors.
Explains how to use the front USB port for data backup and copying.
Describes the meaning of LED statuses and system beep alarms for NAS operation.
Step-by-step instructions for installing RAM modules in various NAS models.
Specific steps for installing RAM in TS-451S and related models.
Specific steps for installing RAM in TVS-473 and related models.
Specific steps for installing RAM in TS-431U and related models.
Specific steps for installing RAM in TS-251 and related models.
Guide for installing network expansion cards to enhance NAS connectivity.
Specific instructions for installing network expansion cards in TS-1635.
Specific instructions for installing network expansion cards in TVS-473 series.
Step-by-step guide for installing 2.5-inch and 3.5-inch SATA hard drives.
Specific procedure for installing hard drives in the TS-1635 model.
Specific procedure for installing hard drives in the TVS-473 series.
Specific procedure for installing hard drives in the TS-112P series.
Information on replacing hard drives without shutting down the NAS.
Instructions for attaching heat sinks to M.2 SSD controllers for better operation.
General guide for installing M.2 SSDs in compatible NAS models.
Specific steps for installing M.2 SSDs in the TBS-453A model.
Steps to recover RAID configurations after drive removal or failure.
Guide to navigating and using the NAS LCD panel for settings and information.
Instructions for installing/replacing a hot-swappable PSU in 1U rackmount NAS.
Instructions for replacing PSUs in 2U/3U rackmount NAS models.
Table detailing FCC and CE compliance classes for various NAS models.
To Next Page
