Need help?Do you have a question about the QNAP TS-210 and is the answer not in the manual?
General| Storage drive size | 3.5 \ |
|---|---|
| Storage drive capacity | 0 GB |
| Storage drive interface | Serial ATA, Serial ATA II |
| Total installed storage capacity | 0 TB |
| Number of storage drives installed | 0 |
| Number of storage drives supported | 2 |
| Flash memory | 16 MB |
| Internal memory | 0.25 GB |
| Internal memory type | DDR2 |
| Processor model | 6281 |
| Processor family | Marvell |
| Processor frequency | 0.8 GHz |
| Number of processors installed | 1 |
| USB 2.0 ports quantity | 3 |
| Power supply unit (PSU) capacity | 60 W |
| External power adapter | Yes |
| Fan | 6cm |
| Dimensions (WxDxH) | 85 x 218.4 x 165.5 mm |
| Power requirements | 100-240V |
| Networking features | Gigabit Ethernet |
| Compatible operating systems | Windows 2000, XP, Vista (32/ 64 bit), Windows 7 (32/ 64 bit), Server 2003/ 2008, Mac OS X, Linux, Unix |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 0 - 95 % |
| LED indicators | Fan fail, HDD, LAN, Power, Status, Y |
| Number of fans | 1 fan(s) |
| Cabling technology | 10/100/1000BASE-T(X) |
| Maximum data transfer rate | 1000 Mbit/s |
| Number of users | 2048 user(s) |
| Security algorithms | HTTPS, SSH, SSL/TLS |
Weight and Dimensions| Weight | 910 g |
|---|
Critical safety instructions for operating the NAS.
Details on CPU, memory, and drive bay configurations for various models.
Controls for turning the NAS on and off.
Steps for basic and advanced system resets.
How to perform data backup using the front USB port.
Describes status indicators for the NAS system.
Indicates network connection and hard drive status.
Explains different beep sounds and their meanings.
Instructions for installing RAM on 4/5/6-bay TS-x59 Pro II models.
Instructions for installing RAM on specific TS-879U/1279U models.
Guide to installing network expansion cards on specific models.
Guide for installing network expansion cards on specific TS-879U/1279U models.
Steps to recover RAID volumes from disk disconnection or removal.
Shows server name, IP address, and detected hard drives.
Explains how to configure disk volumes using the LCD panel.
Viewing system status and network details on the LCD.
Instructions for installing a power supply unit in 1U rackmount models.
Replacing PSU in 2U Turbo NAS (TS-1279U-RP/TS-EC1279U-RP).
Replacing PSU in other 2U Turbo NAS models.
Configuring web interface alerts for redundant power supply.
Explains the status indicators for 1U NAS power supplies.
How to silence the power alarm on 1U NAS models.
To Next Page
