EasyManuals Logo

QNAP TS-451 User Manual

QNAP TS-451
135 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
54
3. To remove installed memory modules, gently pull the retention clips outwards on each
side so that the module tilts up at a 30-degree angle for easy removal. Remove module.
4. Hold the memory module by grasping its edges. Align the notch on the RAM module
with the ridge in the memory socket. Slide the memory module into the socket at a
30-degree angle. Ensure that the module is firmly inserted into the socket and that
the retention clamps are secure.
Note: The maximum supported memory is 64GB.
For one SODIMM module, insert memory into slot A2 or B2.
For two SODIMM modules using dual channel, insert memory into A1 and A2, B1 and B2,
or A2 and B2.
For three SODIMM modules, insert memory into A1 and A2 and B2 or B1 and B2 and A2.

Table of Contents

Other manuals for QNAP TS-451

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the QNAP TS-451 and is the answer not in the manual?

QNAP TS-451 Specifications

General IconGeneral
RAID levels1, 5, 6, 10, JBOD
Storage drive size2.5/3.5 \
Storage drive capacity3000 GB
Supported file systemsext3, ext4, FAT32, HFS+, NTFS
Storage drive interfaceSerial ATA III
Storage drives installedYes
Installed storage drive typeHDD
Supported storage drive typesHDD & SSD
Total installed storage capacity12 TB
Maximum supported storage capacity- TB
Number of storage drives installed4
Processor cores2
Processor model-
Processor familyIntel® Celeron®
Processor frequency2.41 GHz
Flash memory512 MB
Internal memory1 GB
Internal memory typeDDR3L
Maximum RAM supported8 GB
Wi-FiNo
Ethernet LAN data rates1000 Mbit/s
Supported network protocolsCIFS/SMB, AFP(v3.3), NFS(v3), FTP, FTPS, SFTP, TFTP, HTTP(S), Telnet, SSH, iSCSI, SNMP, SMTP, SMSC
Fiber ports quantity0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Chassis typeTower
Cooling typeActive
Fan diameter120 mm
Product colorWhite
LED indicatorsHDD, LAN, Status, USB
Number of fans1 fan(s)
Cable lock slot typeKensington
TypeNAS
Device classHome & Home Office
Backup featuresCloud, iSCSI LUN
Number of users4096 user(s)
Security algorithms256-bit AES, FIPS 140-2, HTTPS, SSH
Operating system version4.1
Operating system installedQNAP Turbo System
AC input voltage100-240 V
Power supply locationExternal
Power supply unit (PSU) capacity90 W
Cables includedAC, LAN (RJ-45)
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)5 - 95 %
Weight and Dimensions IconWeight and Dimensions
Depth235 mm
Width180 mm
Height177 mm
Weight3000 g
Package weight4300 g

Related product manuals