EasyManua.ls Logo

QNAP TS-451DeU - Page 6

QNAP TS-451DeU
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Component TS-451DeU-2G
Drive compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid-state drives
M.2 SSD slots 2 x SATA 6 Gbps
M.2 SSD form factor 2280
SSD cache acceleration support 3.5-inch drive bays:1 to 4
Hot-swapping Supported
Network
2.5 Gigabit Ethernet ports 2 x 2.5 GbE RJ45
Note
The 2.5 Gigabit Ethernet port provides 3 network
connection speeds: 2.5G, 1G, 100M, and 10M.
External I/O Ports & Expansion Slots
USB ports 2 x USB 2.0 Type-A
2 x USB 3.2 Gen 1 Type-A
Interface
Buttons Power
Reset
Dimensions
Form factor 1U Rackmount
Dimensions (H x W x D) 43.3 x 430 x 294.9 mm
(1.74 x 16.92 x 11.61 in)
Net weight 4.15 kg (9.15 lbs)
Rail compatibility RAIL-B02
Note
Rail kits are not included with the NAS and must be
purchased separately. For details, contact an
authorized reseller or go to http://shop.qnap.com.
Others
Power supply unit 100W, 100-240V AC, 50/60 Hz
System battery CR2032 lithium battery (3V, 225 mAh)
Sound level 21.6 dB(A)
Note
The sound level was tested at a bystander position,
which is within one meter of the NAS. The test NAS
operated at low speed with the maximum number of
drives installed.
Fans System: 3 x 40 mm, 12V DC fans
Operating temperature 0˚C to 40˚C (32˚F to 104˚F)
TS-451DeU User Guide
Product Overview 5

Related product manuals