Need help?Do you have a question about the QNAP Turbo NAS HS-210 and is the answer not in the manual?
Explains the meaning of system status LEDs (power, HDD, etc.).
Instructions for installing RAM modules in the TS-453mini model.
Guide to installing network expansion cards in specific TVS and TS models.
Step-by-step instructions for installing hard drives into the NAS.
How to check system status, network settings, and disk info on the LCD.
Steps for installing a power supply unit in 1U rackmount models.
Contact information for online support and the QNAP forum.
Contact details for technical support in North America.
General| Model | HS-210 |
|---|---|
| Category | Network Storage Server |
| Form Factor | Desktop |
| Flash Memory | 512 MB |
| Drive Bays | 2 |
| Maximum Internal Raw Capacity | 16 TB (8 TB x 2) |
| Network Interface | Gigabit Ethernet |
| LED Indicators | Status, LAN, USB, HDD1, HDD2 |
| Buttons | Power, Reset |
| Weight | 1.2 kg |
| RAM | 512MB DDR3 |
| Drive Compatibility | 2.5" SATA HDD/SSD |
| LAN Port | 1 x Gigabit RJ-45 |
| USB Ports | 2 x USB 3.0 |
| Supported RAID Types | RAID 0, RAID 1, JBOD |
| Operating System | QTS |
| Noise Level | Silent |
To Next Page
