QOLSYS IQ Motion User Manual

IQ MOTION- INSTALLATION MANUAL
QOLSYS CONFIDENTIAL AND PROPRIETARY PAGE 1 OF 6
© Last revised 2/27/15 All rights reserved
The Qolsys IQ Motion is a high-performance wireless motion
sensor that uses advanced power circuit technology to extend
battery life. The tamper-resistant casing along with an
electronic sensor discourages physical tampering and the
sensor is equipped with a pet immunity feature that prevents
accidental triggers by household pets. The IQ Motion works
seamlessly with the Qolsys IQ Panel.
•
Advanced circuit technology resulting in ultra-low power
consumption
•
Tamper detection/reporting
•
Rigid wall mounting for discreet placement
•
Pet immunity
•
Easy to install batteries
•
Supervisory health messaging
•
Sensor Motion detection
•
Transmits 2 signals per 5 minute period
PIR (Passive Infrared) Motion Sensors
2 Mounting screws
2 AAA Alkaline batteries
PRODUCT FEATURESPARTS INCLUDED
IQ MOTION
•
Wireless signal range: 600 ft (200 m), open air
•
Code outputs: paring, tamper, tamper restore, alarm detect
motion, alarm restore, supervisory, low battery
•
Transmitter frequency: 319.5MHZ +-15KHz
•
Transmitter bandwidth: 24KHZ
•
Modulation type: ASK-OOK
•
RF output power!91.1dBuV +/- 5% at 3m
•
Sensor Range 30 ft (9.1 m) x 50 ft (15.2 m)
•
Maximum Horizontal Sensing Angle 80°
TECHNICAL SPECIFICATIONS

QOLSYS IQ Motion Specifications

General

Type	Motion Sensor
Sensor Type	Passive Infrared (PIR)
Detection Angle	90 degrees
Pet Immunity	Up to 40 lbs
Power Source	Battery
Battery Type	CR123A Lithium Battery
Battery Life	Up to 5 years
Operating Temperature	14°F to 122°F (-10°C to 50°C)
Mounting	Wall or corner mount
Range	Up to 600 feet in open air
Detection Range	40 ft

Summary

Technical Specifications

Parts Included

Product Features

Installation Guidelines

Mounting Options

Flush Wall Mount

Standard mounting on a flat wall for motion sensor placement.

Corner Straight Mount

Mounting the sensor in a corner for extended coverage.

Corner Angle Down Mount

Mounting the sensor in a corner at a downward angle.

Battery Activation

Mounting Instructions

Flush Mount Installation

Instructions for attaching the sensor back cover to a wall.

Corner Mount Installation

Instructions for attaching the sensor back cover in a corner.

Mounting for Pet Sensitivity

Programming the IQ Panel

Battery Replacement

Environmental Characteristics

Specifications Summary

Support Contact

Important Information