QOLSYS IQ MINI DW S Series User Manual

STEP
1
IQ MINI DW S-LINE QUICK INSTALL GUIDE
✓
Exterior Doors
✓
Sliding
glass
doors
Windows
✓
CHOOSE
INSTALLATION
LOCATION
Also great for:
Medicine cabinets
Gun safes
Garage doors
Interior doors
SPECIFICATIONS
SEE REVERSE FOR REMAINING STEPS
Sensor: 2.25”H x 1”W x .5”D
Wireless signal range: 600ft (200M), open air.
Code outputs: tamper, tamper restore, alarm, alarm
restore, low battery.
Transmitter frequency: SECURE 319.5 MHz (S-Line)
Unique code ID
Supervisory keep-alive interval: 70 minutes.
RF Peak field strength: typical 36000 uV/m at 3m
Operating Temperature: -10C~50C
Relative Humidity: 5-95% Non-Condensing
Storage Temperature: -40-80C
Replace battery with exact replacement every 5 years
with 3V Lithium (x2).
(2) -Panasonic CR2032
-Energizer CR2032
-Duracell DL2032
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)

QOLSYS IQ MINI DW S Series Specifications

General

Type	Door/Window Sensor
Wireless Frequency	319.5 MHz
Battery Life	Up to 5 years
Battery Type	CR2032
Supervisory Interval	60 minutes
Certifications	FCC, IC
Compatibility	Qolsys IQ Panel 2/2+
Range	Up to 600 feet in open air
Operating Temperature	32° to 120° F (0° to 49° C)
Operating Humidity	5-95% non-condensing

Summary

Installation Location Options

Specifications

Technical details including sensor size, wireless range, frequency, operating and storage temperatures.

Battery Replacement and Safety

Guidance on replacing batteries, including type, frequency, and essential safety precautions.

Installation Steps

Remove Battery Tabs

Step to remove protective tabs from the sensor batteries before installation.

Apply Adhesive

Instruction to apply provided adhesive strips to the sensor and magnet for mounting.

Line Up Sensor and Magnet

Guidance on aligning the sensor and magnet with the locator mark for proper function.

Secure Sensor and Magnet

Details on securing the mounted sensor and magnet, ensuring the gap does not exceed 3/4".

Learn Into Panel

Procedure to place the panel in autolearn mode, tamper the device, and add it to the system.

Support and Compliance

Contact Tech Support

Information on how to get assistance and contact technical support for the product.

Regulatory Compliance

Statements regarding FCC and IC compliance for device operation and interference.