Optional SCSI Card Installation
The next section will take you step by step through the installation of the optional SCSI Card
into your PC or Apple Desktop Computer with an available PCI expansion slot.
(The following steps should be used in conjunction with your computer’s user manual)
Installing the SCSI Card
Step 1. Turn the computer power OFF.
Step 2. Remove the computer’s chassis cover to access the PCI
expansion slot and expansion slot covers.
Step 3. Identify an unused PCI expansion slot.
Step 4. Remove the cover from the selected expansion slot.
Step 5. Align the bus connector on the bottom of the SCSI
adapter with the available slot. Carefully insert the card
into the slot. Attach the SCSI card bracket to the chassis
with the expansion slot cover screw.
Step 6.
Follow the instructions in your Computer documentation
and replace the chassis cover.
Step 7. Make sure all power switches are powered OFF, then
you reconnect the power cables to your computer.
Installing the Drivers
For Windows 95 and 98
• Upon start-up, Windows will automatically detect the new hardware and
install the proper driver for the SCSI card.
For Mac OS
Step 1. Power up your Mac.
Step 2. Insert the Adaptec driver CD provided with the SCSI card into the
CD-ROM Drive.
Step 3. Double click on the Adaptec CD-ROM icon.
Step 4. Double click the Adaptec AVA installer icon and follow the instructions.
13
Installation
To Next Page
Loading...
Need help?
General