A number of other software packages are now also capable of decoding WSPR transmissions, the
most popular of which is WSJT-X.
NOTE: the GPS interface is connected in parallel in the circuit, with the paddle. Therefore, you
should NOT have the GPS connected, while operating the radio as an ordinary CW transceiver. If
you do, the GPS serial data and 1pps will key the transmitter! Disconnect the GPS before using
the radio as a CW transceiver.
The following sections describe the configuration parameters in the Beacon menu.
QMX operang manual; rmware 1_00_012 32
To Next Page
Loading...
