15
TD-001571-01-A
Specifications
CP8 CP12
Configuration: Two-way active loudspeaker Two-way active loudspeaker
LF Transducer: 8 in (203 mm), cone 12 in (305 mm), cone
HF Transducer: 1.4 in (35.6 mm) compression driver 1.4 in (35.6 mm) compression driver
Frequency Response (-6 dB): 56 - 20 kHz 49 - 20 kHz
Frequency Range (-10 dB): 53 - 20 kHz 47 - 20 kHz
Nominal Coverage Angle: 90° Axisymetric 75° Axisymetric
Maximum Rated SPL
1
:
124 dB 126 dB
Amplifier: Class D
Peak: 800 W (LF), 200 W (HF)
Class D
Peak: 800 W (LF), 200 W (HF)
Controls: Power
2 x Gain
MIC Boost Push Switch
6-way Contour Selection Switch
Power
2 x Gain
MIC Boost Push Switch
6-way Contour Selection Switch
Indicators: Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED
Power LED
2 x Input Signal LED
Input B MIC selected LED
Limiter active LED
Connectors: 2 x locking XLR/F ¼” combo (Line Input and MIC/
Line input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector
2 x locking XLR/F ¼” combo (Line Input and MIC/Line
input)
1 x 3.5 mm TRS (Stereo Input)
1 x XLR/M (Mix Output)
1 x IEC power connector
AC Power Input: Universal power supply 100 – 240 VAC, 50 – 60 Hz Universal power supply 100 – 240 VAC, 50 – 60 Hz
AC Power Consumption 1/8th Power: 100 VAC, 0.75 A / 120 VAC, 1.0 A / 240 VAC 0.31 A 100 VAC, 0.75 A / 120 VAC, 1.0 A / 240 VAC 0.31 A
Enclosure Material: Polypropylene Polypropylene
Attachment Points: M8 threaded insert M8 threaded insert
Color: Black (RAL 9011) Black (RAL 9011)
Grille: 18 Gauge powder-coated steel 18 Gauge powder-coated steel
Dimensions (HxWxD): 16.2 x 10.7 x 10.1 in
411 x 273 x 256 mm
20.3 x 13.8 x 12.7 in
516 x 350 x 323 mm
Net Weight: 21.0 lb (9.5 kg) 30.3 lb (13.7 kg)
Shipping Weight: 25.5 lb (11.4 kg) 36.3 (16.5 kg)
Regulatory: EMC, UL, CB, EAC EMC, UL, CB, EAC
Optional Accessories: CP8 Tote, CP8 Outdoor Cover CP8 Yoke CP12 Tote, CP12 Outdoor Cover CP12 Yoke
1 Peak SPL is measured on-axis at 1 m, with dynamic pink noise
NOTE: Specifications subject to change without notice.